Displaying 5
InfiniiVision Oscilloscopes User’s Guide 189
Antialiasing
At slower sweep speeds, the sample rate is reduced and a proprietary display algorithm is
used to minimize the likelihood of aliasing.
By default, Antialiasing is enabled. You should leave Antialiasing enabled unless there is
a specific reason to switch it off.
If you need to switch Antialiasing off, press [Utility]&Options&Preferences and press
the Antialiasing softkey to switch the feature off. The displayed waveforms will be more
susceptible to aliasing.
XGA Video Output
A standard XGA video output connector is provided on the rear panel. You can connect a
monitor to provide a larger display, or to provide a display at a viewing position away from
the oscilloscope.
The oscilloscope’s built-in display will remain on even when an external display is
connected.
For optimal video quality and performance we recommend you use a shielded video cable
with ferrite cores.
To Next Page
Loading...
Need help?
General
