Agilent Technologies InfiniiVision 5000 Series - Accessing the Web Interface

9 Web Interface
280 InfiniiVision Oscilloscopes User’s Guide
Accessing the Web Interface
To access the oscilloscope’s web interface:
1 Connect the oscilloscope to your LAN (see page 276) or establish a point-to-point
connection (see page 278). It is possible to use a point-to-point connection, but using
a normal LAN connection is the preferred method.
2 Type the oscilloscope’s hostname or IP address in the web browser.
The oscilloscope’s web interface Welcome Page is displayed.