Agilent Technologies InfiniiVision 5000 Series User Manual

Initial Setup 2
InfiniiVision Oscilloscopes User’s Guide 49
Power-on the 5000/6000/7000 Series Oscilloscope
1 Connect the power cord to the rear of the oscilloscope, then to a suitable AC voltage
source. Route the power cord so the oscilloscope’s feet and legs do not pinch the
cord.
The oscilloscope automatically adjusts for input line voltages in the range 100 to 240
VAC. The line cord provided is matched to the country of origin.
2 Press the power switch.
The power switch is located on the lower left corner of the front panel. The
oscilloscope will perform a self-test and will be operational in a few seconds.
Power-on the Battery-Powered 6000A Series Oscilloscope
The 6000A Series Option BAT oscilloscopes are battery powered. They have additional
LED indicators on the front panel:
WARNING
Always use a grounded power cord. Do not defeat the power cord ground.
Digital
Select
Position
54684A
Oscilloscope
1 GHz
4 GSa/s
Analog
1234
CAT
I
300 V RMS
~
~
14pF
1 M
50
5 V RMS
AC
BW
50
AC
BW
50
AC
BW
50
AC
BW
50
XY Z
Main
Delayed
Single
Mode
Coupling
Stop
Run
Edge
Pulse
Width
Pattern
More
Cursors
Quick
Meas
Acquire
Display
Auto-
Scale
Save
Recall
Quick
Print
Utility
1
2
Math
Label
3
4
D15
D0
Thru
54684e82

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English