Agilent Technologies InfiniiVision 5000 Series - To Tilt the 7000 Series Oscilloscope up for Easy Viewing

2 Initial Setup
38 InfiniiVision Oscilloscopes User’s Guide
2 Without releasing the hubs, rotate the handle to the desired position. Then release the
hubs. Continue rotating the handle until it clicks into a set position.
To tilt the 7000 Series oscilloscope up for easy viewing
1 Tilt the oscilloscope forward. Rotate the foot down and toward the rear of the
oscilloscope. The foot will lock into place.
2 Repeat for the other foot.