Displaying 5
InfiniiVision Oscilloscopes User’s Guide 181
Amplitude Modulation with Noise Shown at 40% Intensity
Grid Intensity
To adjust the grid (graticule) intensity, press [Display]&Grid and use the Entry knob
to adjust the intensity.
To adjust the display grid (graticule) intensity
1 Press the [Display] key.
2 Turn the Entry knob to change the intensity of the displayed grid. The intensity
level is shown in the Grid softkey and is adjustable from 0 to 100%.
Each major vertical division in the grid corresponds to the vertical sensitivity shown in
the status line at the top of the display.
Each major horizontal division in the grid corresponds to the sweep speed time shown
in the status line at the top of the display.
To Next Page
Loading...
