Serial Decode/Lister 10
InfiniiVision Oscilloscopes User’s Guide 321
Interpreting MIL-STD 1553 Decode
To display serial decode information, you must press Run or Single after switching on
serial decode.
The MIL-STD 1553 decode display is color coded as follows:
• Command and Status decoded data is colored green, with the Remote Terminal
Address (5 bits of data) being displayed first, then the text "C/S:", followed by the
value of the remaining 11 bits of a Command/Status word.
• Data word decoded data is colored white, preceded by the text "D:".
• Command/Status or Data words with a Parity error have the decode text displayed in
red instead of green or white.
• SYNC errors are displayed with the word "SYNC" within red angle brackets.
• Manchester encoding errors are displayed with the word "MANCH" within blue angle
brackets (blue instead of red because a valid Sync pulse started the word).
To Next Page
Loading...
