9 Web Interface
288 InfiniiVision Oscilloscopes User’s Guide
Setting a Password
Whenever you connect the oscilloscope to a LAN, it is good practice to set a password.
The password prevents someone from remotely accessing the oscilloscope via a Web
browser and changing parameters. Remote users can still view the Welcome screen,
view network status, etc., but they can’t operate the instrument or change its setup
without the password.
To set a password:
1 Access the oscilloscope’s web interface (see “Accessing the Web Interface” on
page 280).
2 When the oscilloscope’s web interface is displayed, select the Configure Network tab
from the instrument’s Welcome page.
3 Click the Modify Configuration button.
To Next Page
Loading...
