Web Interface 9
InfiniiVision Oscilloscopes User’s Guide 289
4 Enter your desired password, and click Apply Changes.
When accessing the password protected oscilloscope, the user name is the IP address of
the oscilloscope.
To reset the password
Do one of these things to reset the password:
• Using the keys on the front panel of the oscilloscope, press [Utility]&I/O&LAN Reset
• On 6000L Series oscilloscopes, press the LAN RESET button on the front panel.
or
• Using the web browser select the Configure Network tab, select Modify
Configuration, erase the Password, and select Apply Changes.
To Next Page
Loading...
