10 Serial Decode/Lister
318 InfiniiVision Oscilloscopes User’s Guide
• For LIN 1.3, the checksum appears in blue if correct, or red if incorrect. The checksum
always appears in white for LIN 2.0.
• Decoded text is truncated at the end of the associated frame when there is insufficient
space within frame boundaries.
• Red dots in the decode line indicate that there is data that is not being displayed.
Scroll or expand the horizontal scale to view the information.
• Unknown bus values (undefined or error conditions) are drawn in red.
• If there is an error in the synch field, SYNC will appear in red.
• If the header exceeds the length specified in the standard, THM will appear red.
• If the total frame count exceeds the length specified in the standard, TFM will appear
red (LIN 1.3 only).
• For LIN 1.3 a wakeup signal is indicated by WAKE in blue. If the wakeup signal is not
followed by a valid wakeup delimiter a wakeup error is detected and displayed as WUP
in red.
To Next Page
Loading...
Need help?
General
