Alcatel-Lucent 7210 SAS M - Page 362

VPLS Services Command Reference
Page 362 7210 SAS M Services Guide
— [no] shutdown
— igmp-snooping
— [no] fast-leave
— import policy-name
—no import
— last-member-query-interval interval
—no last-member-query-interval
— max-num-groups max-num-groups
—no max-num-groups
— [no] mrouter-port
— mvr
— from-vpls service-id
—no
from-vpls
— to-sap sap-id
—no to-sap
— query-interval interval
—no query-interval
— query-response-interval interval
—no query-response-interval
— robust-count count
—no robust-count
— [no] send-queries
— static
— [no] group group-address
— [no] source ip-address (applicable only in access-
uplink mode)
— [no] starg
— version version
—no version
— ingress
— aggregate-meter-rate rate-in-kbps [ burst burst-in-kbits]
—no aggregate-meter-rate
— filter ip ip-filter-id
— filter [ ipv6 ipv6-filter-id]
— filter mac mac-filter-id
—no filter [ip ip-filter-id] [ ipv6 ipv6-filter-id] [
mac mac-filter-id]
— qos policy-id
—no qos
— l2pt-termination
—no l2pt-termination
— limit-mac-move [blockable | non-blockable]
—no limit-mac-move
— [no] mac-pinning
— managed-vlan-list
—[no] default-sap
— [no] range vlan-range
— max-nbr-mac-addr table-size
—no max-nbr-mac-addr
—[no] shutdown
— statistics
— ingress
— counter-mode {in-out-profile-count|forward-drop-
count}
— drop-count-extra-vlan-tag-pkts
— no drop-count-extra-vlan-tag-pkts