Alcatel-Lucent 7750 SR OS - Page 894

Configuring a VPRN Service with CLI
Page 894 7750 SR OS Services Guide
advertise-inactive
Enables the advertising of inactive BGP routers to other BGP peers. 1063
aggregator-id-zero
Enables setting the router ID to zero in the aggregator path attribute
when BGP is aggregating routes.
1063
as-override
Replaces all instances of the peer's AS number with the local AS
number in a BGP route's AS_PATH.
1064
authentication-key
Enables MD5 authentication and configures the authentication key. 1065
cluster
Configure the cluster ID for a route reflector server. 1066
connect-retry
Configures the BGP Connect Retry timer value in seconds. 1066
damping
Enables BGP route damping for learned routes as defined within the
route policy.
1067
description
Creates a text description stored in the configuration file for a
configuration context.
952
disable-client-reflect
Disables route reflection by the route reflector to clients in the group. 1067
disable-communities
Specifies BGP to disable sending communities. 1068
disable-fast-external-
failover
Configures BGP fast external failover. 1068
export
Specifies the export route policy to be used for determining which
routes are advertised to peers.
1068
hold-time
Configures the BGP Hold Time in seconds. 1070
import
Specifies the import route policy to be used for determining which
routes are accepted from peers.
1070
keepalive
Configures the BGP keepalive timer in seconds. A keepalive message
is sent every time this timer expires.
1071
local-address
Configures the local IP address used by the group or neighbor when
communicating with BGP peers.
1072
local-as
Adds a BGP virtual AS number. 1072
local-preference
Enables setting the BGP local-preference attribute in incoming routes
if not specified and configures the default value for the attribute.
1073
loop-detect
Configures how the BGP peer session handles loop detection in the AS
Path.
1073
med-out
Enables advertising the Multi-Exit Discriminator (MED) and assigns
the value used for the path attribute for the MED advertised to BGP
Peers if the MED is not already set.
1074
min-as-origination
Configures the minimum interval in seconds at which a given path
attribute, originated by the local router, can be advertised to a peer.
1075
min-route-
advertisement
Configures the minimum interval in seconds at which a given prefix
can be advertised to a peer.
1075
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command Description Page