MPR-E parts lists
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 123
3.8.4 — MPT-HC V2/MPT-XP optical interface option
3.8.5 — MPT-HC V2/MPT-XP external modules (option for MPR-
e)
For MPT-HC V2 external module options, see the 9500 MPR Frequency Plan for MPT
Outdoor Transceivers.
3.8.6 — MPT-HC V2/HC-HQAM with internal diplexer
For MPT-HC V2 with internal diplexer options, see the 9500 MPR Frequency Plan for
MPT Outdoor Transceivers.
3.8.7 — MPT-MC with internal diplexer
For MPT-MC with internal diplexer options, see the 9500 MPR Frequency Plan for MPT
Outdoor Transceivers.
3.8.8 — MPT-HC/HC-HQAM/MC/XP/XP-HQAM/ with external
diplexer
The diplexer included in the available external diplexer assemblies refers to ITU–R F.385,
386 and RF special customers channeling with Tx/Rx separation specified in the 9500 MPR
Frequency Plan for MPT Outdoor Transceivers.
Each diplexer is a 3-port passive device with two band–pass filters as shown in Figure 3.40.
Table 3.26 — MPR-E: MPT-HC V2/MPT-XP option
Name Part number Remarks
SFP 1000Base-Sx 1AB383760001/
3CC50167AAAA
Optical SFP module to be installed optionally in the
MPT to provide the optical Gigabit Ethernet
interface
SFP 1000Base-Lx 1AB383760002/
3CC50168AAAA
To Next Page
Loading...
