Alcatel-Lucent 9500 - Figure 3.76 - E1;T1 From;To Radio Port; Figure 3.77 - E1;T1 From;To Ethernet Port

Functional description
174 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
E1 or T1 can be cross connected to any of the following ports:
• Radio port (Figure 3.76)
• Ethernet port (Figure 3.77)
Each E1 or T1 must be associated to a unique signal flow ID.
Figure 3.76 — E1/T1 from/to radio port
Figure 3.77 — E1/T1 from/to Ethernet port
Typical use of the E1 or T1 from/to Ethernet port is in case of two co-located MSS-Access
to expand the number of PDH ports for the other radio direction.