Alcatel-Lucent 9500 - Figure 4.74 - Ethernet Ports Provisioning

Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 251
4.9.1.4.9.2 — Ethernet port provisioning
Figure 4.74 — Ethernet ports provisioning
4.9.1.4.9.2.1 — A) MPT connection
MPT connected through: select the right port where the MPT is connected to MSS-1c. This
information is used to configure the radio ports used in cross connections (TDM and
VLANs).
4.9.1.4.9.2.2 — B) User 1 - electrical port
To configure an Electrical user port like user 1:
• Port enabled: check the box
•Auto negotiation:
• check the box: the port will negotiate speed and duplex mode with its peer
• do not check the box: speed and duplex mode are selected by the operator
(Forced mode)