Navigator area
278 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 4.99 — Cross-connection clone
This menu is not applicable in Single NE mode with 7705 SAR configuration. In Single NE
mode with 7705 SAR, cross-connections are set up as part of configuration of the
7705 SAR.
4.9.1.4.12 — Networking
This menu must be used to assign (or to show) the networking configuration of the NE.
This menu has the following sub-menus:
• Network Interfaces
• Static Routing
• Routing Table
• Trusted SNMP Managers
• NE Neighbors
None of the networking screens are available when MPR-e is in Single NE mode with
7705 SAR configuration. The MPR-e is integrated into the SAR and has to be considered
one of its peripherals.
To Next Page
Loading...
