Alcatel-Lucent 9500 - Figure 4.82 - TDM Cross Connection between Radio and Ethernet Port

Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 261
4.9.1.4.9.4.2 — B) In-band TMN on one user ethernet port provisioning
To configure the TMN In-band:
•Enabled: Check the box
• Port number: Select one port in the list (only available in 802.1Q and 802.1ad bridge
mode).
• TMN VLAN Id: Enter a valid VLAN Id in the range 2 to 4080.
4.9.1.4.9.4.3 — C) NE public MAC address
NE public MAC address: used as Source Address in Ethernet frames built to carry TDM
information in MPR network. This is a read only field. The NE public MAC address is a
parameter of the application. It is given at launch time.
4.9.1.4.9.5 — TDM cross connection between radio and ethernet user port
Figure 4.82 — TDM cross connection between radio and ethernet port
Max. number of cross-connections: 240.