Alcatel-Lucent 9500 - Radio Configurations; 1+0 in Split-Mount Configuration for MSS-1 C

Radio configurations
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 97
• Flexible aggregate capacity sharing between E1/T1/DS1 and Ethernet
• TDM MEF8 encapsulation
• High Switching Capacity
The following features are available with MPR-e only:
• XPIC
• QoS on the Ethernet traffic
3.5 — Radio configurations
The following radio configurations are available with MSS-1c:
• 1+0 in split-mount
• 2x(1+0) repeater
The following radio configurations are available with MPR-e:
• 1+0 full outdoor
• 1+0 repeater (with MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC only)
• co-channel XPIC full outdoor (with MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC
only) used to establish a 2 x (1+0) radio link.
• 1+1 HSB (with MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC only) when in Single
NE mode with 7705 SAR configuration (with MPR-e 4.1.0)
3.5.1 — 1+0 in split-mount configuration for MSS-1c
A 1+0 configuration is setup with one MSS-1c and one MPT. See Figure 3.35.