Alcatel-Lucent 9500 - Figure 4.97 - TDM2 ETH Cross-Connection

Navigator area
276 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
To manage the cross-connections, select one of the following buttons:
• Add new cross-connection
• Clone cross-connection
• Modify selected cross-connection
• Remove cross-connection
To create the TDM2ETH cross-connection:
1. Click the Add new cross-connection button
2. Enter the VLAN ID
3. Enter the MAC address of the destination IWF
4. Enter the clock source: Differential or Adaptive
5. Click on the Add button
Figure 4.97 — TDM2ETH cross-connection
The created cross-connection will appear in the cross-connection list, as shown in
Figure 4.96.
An existing cross-connection can be:
• modified by pressing the Modify cross-connection button (Figure 4.98)
• deleted by pressing the Remove cross-connection button