Navigator area
268 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
4.9.1.4.9.8.2 — B) In 802.1ad (Q in Q) mode
If the port is configured in NNI, no choice is offered to the operator (“Admit tagged frames
only” is automatically selected).
If the port is configured in UNI “Admit all frames” (untagged and C-Tagged frames are
admitted) is automatically selected, then the S-VLAN associated to this UNI port is
displayed and cannot be changed.
• Select the S_VLAN priority in the list (from 0 to 7)
• Select or not the use of inner C-VLAN priority for S-VLAN priority
Figure 4.88 — Port VLAN provisioning
4.9.1.4.9.9 — Storm control and rate limiting
For Broadcast, Multicast and DLF Storm control, to enable this control, select the check
box and enter a value in the authorized range.
Note: C-VLANs cannot be modified.
To Next Page
Loading...
