Functional description
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 163
Figure 3.68 — Traffic profiles
• Case 4 and 5
In these cases Ethernet packets enter Terminal 1 and are extracted in Terminal 2. In
case 4 the Ethernet packets encapsulate the E1 or T1 stream; in case 5 the packets are
native Ethernet packets. None of the IWFs belongs to the 9500 MPR network. The
Circuit Emulation Service is ETH2ETH in Terminal 1 and Terminal 2. No Cross
connections must be implemented. The path is automatically implemented with the
standard auto-learning algorithm of the 9500 MPR Ethernet switch.
3.10.11.1 — TDM2TDM
E1 or T1 traffic packetized only internally to 9500 MPR equipment. E1 Traffic in
TDM2TDM profile shows an example using E1 traffic.
To Next Page
Loading...
