Alcatel-Lucent 9500 - Diplexers; Figure 3.50 - Incorrect Protected Mounting of 6 Ghz MPT-XC with Internal and External

Functional description
140 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 3.50 — Incorrect protected mounting of 6 GHz MPT-xC with internal and
external diplexers
2. with external diplexer: due to a high number of shifters, the diplexer is external for
the flexibility of the shifter customization (5.8, 6, 7, 8, and 10.5 GHz for MPR-E, 5.8,
6, 7, and 8 GHz for MPR-A) where the MPT ODU is composed of two independent
units: the external diplexer assembly (containing the diplexer) and the RF transceiver
assembly (containing the RF section); each of this type of MPT ODU is identified by
two Logistical Items, one for the external diplexer assembly and another for the RF
transceiver assembly. To read the external diplexer assembly identification label, it is
necessary to separate the external diplexer assembly from the RF transceiver
assembly.
Table 3.39 lists the MPT ODUs that can support an external diplexer.