Alcatel-Lucent 9500 - MPT-HC V2;HC-HQAM with Internal Diplexer; MPT-HC;HC-HQAM;XP;XP-HQAM;9558 HC External Modules (Option for MPR-E); MPT-HC;HC-HQAM;XP;XP-HQAM;9558 HC with External Diplexer; Table 3.33 - MPR-A: MPT-HC V2;MPT-XP;9558 HC Option

MPR-A parts lists
128 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
interface option
3.9.5 — MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC external
modules (option for MPR-e)
3.9.6 — MPT-HC V2/HC-HQAM with internal diplexer
For transceivers with internal diplexer options, see the 9500 MPR Frequency Plan for MPT
Outdoor Transceivers.
3.9.7 — MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC with external
diplexer
The diplexer included in the available external diplexer assemblies refers to ITU–R F.385,
386 and RF special customers channeling with Tx/Rx separation specified in the 9500 MPR
Frequency Plan for MPT Outdoor Transceivers.
Each diplexer is a 3-port passive device with two band–pass filters as shown in Figure 3.42.
Table 3.33 — MPR-A: MPT-HC V2/MPT-XP/9558HC option
Name Part number Remarks
SFP 1000Base-SX 1AB 38376 0001/3CC
50167 AAAA
Optical SFP module to be installed optionally
in the MPT-HC/HC-HQAM/XP/XP-HQAM/
9558HC to provide the optical Gigabit
Ethernet interface
Table 3.34 — MPR-A:MPT-HC/HC-HQAM/XP/XP-HQAM/9558HC external modules
Description Part number Remarks
RPS MODULE 3DB20117BAXX All frequency band for 1+1 configuration. The 1+1
configuration is not available for MPR-e.
XPIC-RPS MODULE 3DB20116BBXX
3DB20116BCXX
All frequency bands. This module is used for the XPIC
configuration.