Alcatel-Lucent 9500 - Figure 4.61 - XPIC with Horizontal Polarization System Overview; Figure 4.62 - XPD

Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 239
Figure 4.61 — XPIC with horizontal polarization system overview
When the XPIC has been configured in the Radio Synthesis tab the XPD value is
shown (see Figure 4.62).
Figure 4.62 — XPD
Warning: When you change a radio parameter (such as modulation mode ACM/FCM,
modulation/capacity, Tx or Rx freq or shifter value), a warning message is raised (see
Figure 4.63). You need to ensure that the radio configuration between the two MPTs
involved in XPIC is aligned.