Functional description
166 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
• Flow Id is provisioned by MCT/NMS (One VLAN is assigned to each bi-directional
circuit emulated E1 or T1 flow)
3.10.11.3 — ETH2ETH
None of the IWFs belongs to 9500 MPR.
None of the parameters listed in the previous section has to be configured (the 9500 MPR
is transparent). Figure 3.71 shows an example using E1 traffic.
Figure 3.71 — E1 Traffic in ETH2ETH (DATA) profile
3.10.12 — MSS-1c Ethernet traffic management
The Ethernet traffic is all the traffic entered the MPR network from user Ethernet ports.
By MCT/NMS it is possible to define the way to manage the Ethernet traffic according to
one of the following options:
• 802.1D (MAC Address bridge)
• 802.1Q (Virtual Bridge)
• 802.1ad (QinQ)
3.10.12.1 — Bridge type change
In case of change of the bridge type, a new configuration file must be sent to the NE (or an
old file can be used).
To Next Page
Loading...
