Alcatel-Lucent 9500 - Figure 3.26 - MPT-XP;XP-HQAM Connection; From Extended Power Unit); MPT-XP;XP-HQAM Connectivity for MPR-E (1+0 Configuration)

9500 family overview
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 87
Figure 3.26 — MPT-XP/XP-HQAM connection (optical cable from MSS-1c + (power
supply cable from Extended Power Unit)
3.1.6.3 — MPT-XP/XP-HQAM connectivity for MPR-e (1+0 configuration)
The MPT-XP/XP-HQAM can be connected to the Ethernet generic Device through:
• Electrical interface
or
• Optical interface (an optional SFP must be installed in the MPT-XP/XP-HQAM).
3.1.6.3.1 — Electrical interface
The MPT-XP/XP-HQAM MUST be connected to a MPT Extended Power unit through one
electrical Ethernet cable.
The maximum cable length is 100 m.
Figure 3.27 shows the connections used with the MPT Extended Power Unit.
The MPT Extended Power unit is an indoor device that is installed in a 19-inch or 21-inch
rack.
Note: A special adapter cord must be connected to the coaxial cable on the MPT-XP/XP-
HQAM.
MPT Extended
Power Unit
MSS-1c
MPT #1
CT
Port
WebEML
N-RJ45
Adapter Cord
Coaxial power supply cable
Optical Ethernet cable
23064