Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 267
4.9.1.4.9.8 — Port VLAN Provisioning
This screen can be filled only if the 802.1Q or 802.1ad bridge modes have been selected in
Bridge configuration screen.
4.9.1.4.9.8.1 — A) In 802.1Q mode
To configure the behavior of each user port you can:
• Select Admit all frames and for untagged frames at ingress:
• Select the VLAN Id in the proposed list. This list contains all the VLAN in
which the port is involved.
• Select the priority in the list (from 0 to 7)
• Or select Admit tagged frames only. In this case untagged frames are dropped.
Figure 4.87 — Port VLAN provisioning
To Next Page
Loading...
