Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 219
4.9.1.4.3.1 — 1+0 configuration
Figure 4.42 — Protection configuration
4.9.1.4.4 — MPR-e Radio scheme configuration
For MPR-e standalone, the protection scheme must be explicitly selected as 1+0. When the
MPR-e is in Single NE mode with 7705 SAR, the protection scheme is ruled by the
7705 SAR according to mw-link configuration in the CLI.
To Next Page
Loading...
