Functional description
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 159
Frequency Plan: For 9558HC frequency plan for the 5.725 and 5.850 GHz unlicensed band,
refer to Figure 3.66.
Output Power: A requirement of operating in the unlicensed band is to limit transmit output
power to not more than +30.0 dBm at the antenna port. It is the responsibility of the user to
transmit not more than +30.0 dBm.
Figure 3.66 — Frequency plan 9558HC: 5.725 to 5.850 GHz unlicensed band (FCC
Part 15 and IC RSS-210)
3.10.9 — MPR-e standalone IP addresses
Danger: Danger of public exposure to long term RF radiated energy. When using a 1 ft flat
panel antenna with a 1 watt (+30 dBm) output power, the antenna must be located in an
area that does not allow the general population access to within 12 meters (5.8 GHz) of
the antenna.
Note: To meet FCC part 15 requirements, output power for 30 MHz 4QAM and 8QAM
channels must not be provisioned greater than 24 dBm. This is not enforced by the user
interface and is the responsibility of the operator to guarantee provisioning of the radio
transmit power. For transmit power specification, refer to the System Application Rules
document, found in the Alcatel-Lucent 9500 MPR-A Engineering Support Documentation.
To Next Page
Loading...
