Alcatel-Lucent 9500 - Figure 3.8 - MPT-HC;HC-HQAM;9558 HC Connection

9500 family overview
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 69
Figure 3.8 — MPT-HC/HC-HQAM/9558HC connection
3.1.5.1.2 — Optical cable
Two cables connect the MSS-1c to its MPT-HC/HC-HQAM/9558HC:
• One cable is a 50 ohm cable to send the power supply to the MPT-HC/HC-HQAM/
9558HC:
• for length lower or equal to 100 m the power cable can be CAT5E cable to send
the power supply to the MPT-HC/HC-HQAM/9558HC. The Ethernet electrical
cable is provided with connectors to be mounted on site with the specific RJ45
tool (1AD160490001);
• for length higher than 100m, the cable is a 50 ohm coaxial cable to send the
power supply to the MPT-HC/HC-HQAM/9558HC.
• The second cable is an Ethernet optical cable.The Ethernet optical cable is
preassembled and available in different lengths (up to 350 m).
Note: In case of length lower than 100m and presence in the field of 1 coaxial already
installed and free it is recommended to use the coax cable to minimize the installation
effort.