Alcatel-Lucent 9500 - Figure 4.110 - Network Interfaces Attachment to an OSPF Area; Figure 4.111 - Interfaces; Figure 4.112 - Network Interfaces Attachment to an OSPF Area

Navigator area
284 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 4.110 — Network interfaces attachment to an OSPF Area
• To detach an interface
Figure 4.111 — Interfaces
1. Select None.
2. Click on the Detach button.
Figure 4.112 — Network interfaces attachment to an OSPF Area
4.9.1.4.12.2 — Static routing
The Static Routing menu is used to configure the parameters for IP Static Routing
Configuration, see Figure 4.113.
•Route Type: the options are Network, Host, and Default.
•Destination an address or a range of IP addresses with the subnet mask.