9500 family overview
80 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
Figure 3.19 — MPT-HC/HC-HQAM/9558HC connection (optical cable for traffic and
coaxial cable for power supply)
The recommended value is 3 Amps.
3.1.5.3 — MPT-HC/HC-HQAM/9558HC connectivity for MPR-e (co-
channel XPIC configuration)
In this configuration, the MPT-HC/HC-HQAM/9558HC units must be installed on the
OMT that is directly connected to the antenna. The two MPT-HC/HC-HQAM/9558HC
units must be connected to the Indoor Section as explained in MPT-HC/HC-HQAM/
9558HC connectivity for MPR-e (1+0 configuration).
Note: The MPT-HC/HC-HQAM/9558HC must be connected to a fuse or a breaker on a
customer power distribution box.
To Next Page
Loading...
