Navigator area
314 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
The upper part of the window shows a graphical evolution of the counters.
The lower part of the window will show a table reporting the counter values when
monitoring is activated. Each time the counters are refreshed, an entry will be added to the
table.
Click on the Start icon to start the monitoring of the MPT QoS Ingress counters and set the
refresh period (range from 5s to 60s with default value to 5s).
Click on the Stop icon to stop the MPT QoS Ingress counters monitoring.
Click on the Reset button to reset the NE counter computation.
Figure 4.146 — Ethernet: QOS counters
The QoS counters are:
• Transmitted Frames
• Discarded Frames
• Transmitted Bytes
Note: The Egress Discarded Frames counter is associated with 100Base-Tx. It has no
meaning when the MPR-e is working at 1000B-T/1000B-SX
To Next Page
Loading...
