Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 247
4.9.1.4.9.1 — Specific behaviors
4.9.1.4.9.1.1 — A) Parameters leading to a restart
The modification of the parameters, which lead to a NE restart, are the following ones
(these parameters are identified by a little lamp):
Note: When the MCT is launched from the 1353OMS, the management of the configuration
of the MSS-1c is done through a provisioning file that has to be uploaded/downloaded
from/to the NE with a FTP server. The first screen of the MSS-1c provisioning invites the
User to do this operation and offers different provisioning modes: "Initial configuration"
mode must be used to create a first configuration and the "reconfiguration mode" is
appropriate to apply modification on an existing configuration. Regarding the
configuration of the MSS-1c itself, the description given in the rest of this section is fully
applicable.
Table 4.1 — Parameters leading to a restart
Bridge mode
Connection of the MPT:
PDH configuration:
Disabling Ingress Port Rate Limiting
Disabling Egress Port Rate Limiting
To Next Page
Loading...
