Alcatel-Lucent 9500 - Figure 3.29 - MPT-XP;XP-HQAM Connection through the MPT Extended Power Unit; MPT-XP;XP-HQAM Connectivity for MPR-E (1+1 HSB in Single NE Mode with 7705 SAR); Xpic)

To Next Page

To Previous Page

9500 family overview

90 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01

Figure 3.29 — MPT-XP/XP-HQAM connection through the MPT Extended Power Unit (co-channel XPIC)

3.1.6.5 — MPT-XP/XP-HQAM connectivity for MPR-e (1+1 HSB in Single

NE mode with 7705 SAR)

In this configuration, the MPT-XP/XP-HQAM units can be installed on the same antenna

or different antennas (SD). The two MPT-XP/XP-HQAM units must be connected to the

7705 SAR, and if they are on the same antenna, connected to each other using a coupler.

See Figure 3.30 for an example.

Two types of coupler are available for the MPT-XP/XP-HQAM:

Other manuals for Alcatel-Lucent 9500