Navigator area
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 237
Figure 4.59 — Radio configuration MPT-HC HQAM: ACM - ATPC
In this example MPT-HC compatibility is disabled, offering modulation
schemes up to 1024QAM. All modulations from QPSK up to 1024QAM are
available.
8. XPIC (only for MPR-e with MPT-HC/HC-HQAM/XP/XP-HQAM)
The XPIC can be configured for an MPT-HC V2/MPT-XP (with the RPS + XPIC
external module) and for MPT-HC-HQAM/XP-HQAM (with embedded XPIC
functions). XPIC is not available in 1+1 HSB protection.
The XPIC can be configured with or without Adaptive Modulation.
• In the Modem Profile Option field select a profile with the XPIC.
• In the XPIC Polarization field select the polarization to be associated with the
MPT-HC/HC-HQAM/XP/XP-HQAM: Horizontal or Vertical.
• Configure the second MPT-HC/HC-HQAM/XP/XP-HQAM to be associated in
the XPIC configuration with the same profile and with opposite polarization.
To Next Page
Loading...
