Alcatel-Lucent 9500 - (Co-Channel XPIC); Figure 3.20 - MPT-HC;HC-HQAM;9558 HC Connection through the Power Injector Box

9500 family overview
MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01 81
The two MPT-HC/HC-HQAM/9558HC units must also be interconnected through two
terminated cables (XPIC and RPS cables) as shown in Figure 3.20, Figure 3.21, and
Figure 3.22.
Figure 3.20 — MPT-HC/HC-HQAM/9558HC connection through the Power Injector Box
(co-channel XPIC)
Note: The extra length of the RPS and XPIC cables must be bound by using tie-wraps,
either on the pole or on the other cables coming from the ODUs.