Navigator area
250 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
If the operator cancels the conversion, this message is displayed, the loading and
conversion are stopped and the data displayed in the MSS-1c screens are unmodified.
• Both conversions may be applied on the same file, one after the other. This is the case
when the file has been saved with a MSS-1c 10E1 on another NE.
4.9.1.4.9.1.3 — Conversion error
It is not possible to load a configuration file saved in a MSS-1c 16 E1 topology on a MSS-
1c 10 E1. There is no conversion provided and this message will warn the operator in this
case.
To Next Page
Loading...
