14 MPR-e and MSS-1c User Manual 3DB19901EFAA Edition 01
8.6.3.1 — Balanced or unbalanced impedance .................................................................612
8.6.3.2 — E1/T1 point to point loop test........................................................................612
8.6.4 — Ethernet traffic for MSS-1c ..................................................................................613
8.6.4.1 — Check/set traffic Ethernet port parameters .......................................................614
8.6.5 — Ethernet traffic QoS for the MPR-e.........................................................................614
8.6.6 — NE configuration...............................................................................................614
8.6.6.1 — Check/set the local NE IP address (valid for MSS-1c and MPR-e standalone only)............614
8.6.6.2 — Check/set the MSS-1c Ethernet access (OS) configuration .......................................614
8.6.6.3 — Check/set the MPR-e TMN in-band configuration..................................................614
8.6.6.4 — Check/set OSPF configuration (valid for MSS-1c and MPR-e standalone only) ................615
8.6.6.5 — Check/set IP static routing configuration (valid for MSS-1c and MPR-e
standalone only).....................................................................................................615
8.6.7 — Date/time settings (valid for MSS-1c and MPR-e standalone only) ....................................615
8.6.8 — Hop E1/T1 stability test for MSS-1c ........................................................................615
8.6.9 — Ethernet traffic stability test for MSS-1c..................................................................616
8.6.10 — Ethernet traffic hop stability test with MPR-e standalone ............................................620
8.6.11 — Ethernet traffic verification test for MPR-e in Single NE mode with 7705 SAR ....................622
8.7 — Commissioning station B – phase 2 (acceptance test) .........................................................622
8.8 — Final operations......................................................................................................623
8.9 — Annex A: fine antenna alignment .................................................................................623
9 — Abbreviations ................................................................................................ 625
To Next Page
Loading...
