Allied Telesis AT-SBx908 Gen2 User Manual

AT-SBx908 Gen2 Switch Installation Guide
133
Figure 95. Removing the AT-SBxPWRSYS2 AC Power Supply
5. Do one of the following:
 To install a new power supply, refer to “Installing AT-
SBxPWRSYS2 AC Power Supplies” on page 61 for instructions.
 If you are not installing a new power supply in the chassis, cover
the empty PSU slot with the blank panel, as explained in “Installing
the Blank Power Supply Slot Cover” on page 75.

Allied Telesis AT-SBx908 Gen2 Specifications

General

Brand	Allied Telesis
Model	AT-SBx908 Gen2
Category	Switch
Language	English