Allied Telesis AT-SBx908 Gen2 User Manual

AT-SBx908 Gen2 Switch Installation Guide
89
Figure 56. Attaching the Grounding Lug and Wire to the Grounding Post
6. Secure the grounding wire with the nut and washer removed in step 4,
with an 8 mm wrench. Refer to Figure 57 on page 90.
Allied Telesis recommends tightening the nut and washer to 26 inch-
lbs.

Allied Telesis AT-SBx908 Gen2 Specifications

General

Brand	Allied Telesis
Model	AT-SBx908 Gen2
Category	Switch
Language	English