Allied Telesis AT-SBx908 Gen2 User Manual

AT-SBx908 Gen2 Switch Installation Guide
63
Figure 29. Sliding the AT-SBxPWRSYS2 AC Power Supply into the
Chassis
5. Gently press on the faceplate of the power supply to seat the unit on
the connector on the backplane of the chassis, and lower the locking
handle to secure the unit in the chassis. Refer to Figure 30 on page 64.

Allied Telesis AT-SBx908 Gen2 Specifications

General

Brand	Allied Telesis
Model	AT-SBx908 Gen2
Category	Switch
Language	English