Allied Telesis AT-SBx908 Gen2 User Manual

AT-SBx908 Gen2 Switch Installation Guide
47
Figure 14. Pre-installed Items on the Rear Panel
Note
You should retain the original packaging material in the event you
need to return the unit to Allied Telesis.
Note
The product does not come with power supplies. Power supplies
must be ordered separately.
5. Remove the accessory kit from the shipping box and verify its
components, listed in Figure 15 on page 48
2. Two AT-FAN08 Fan
Modules
1. One ground wire lug
2
1
2

Allied Telesis AT-SBx908 Gen2 Specifications

General

Brand	Allied Telesis
Model	AT-SBx908 Gen2
Category	Switch
Language	English