AT-x908 Gen2 Switch Installation Guide
27
Management Panel
The components on the management panel are identified in Figure 4.
Figure 4. Management Panel
The management panel is not field-replaceable.
USB Port You can use the USB port with a flash drive to perform the following
management functions:
Provide a centralized network backup location for Allied Telesis
Management Framework.
Store backup copies of configuration files.
Transfer configuration files between switches that are to have
similar configurations.
Store or transfer log files.
Store or transfer debug files (for example, the output of the SHOW
TECH-SUPPORT command).
Boot the AlliedWare Plus operating system and master
configuration file from flash drive.
Using a flash drive with the switch is optional.
USB Slot NET MGMT
Port
CONSOLE
RS-232
Serial Port
Switch ID
LED
eco-friendly
Button
Reset Button
To Next Page
Loading...
