Allied Telesis AT-SBx908 Gen2 User Manual

AT-x908 Gen2 Switch Installation Guide
31
Caution
The Ethernet line cards do not forward network traffic for about three
minutes while they initialize the AlliedWare Plus Operating System
and configure their parameter settings. Some network traffic may be
lost.
Note
To reset individual line cards in the chassis, use the REBOOT or
RELOAD command in the AlliedWare Plus operating system.

Allied Telesis AT-SBx908 Gen2 Specifications

General

Brand	Allied Telesis
Model	AT-SBx908 Gen2
Category	Switch
Language	English