3 Hardware Specifications
3.1 Safety instructions
English
All of the safety and operating instructions should be read before the product is operated and should be
maintained for further reference. Please follow all of the warnings on this product and its operating
instructions.
• WARNING: To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or
intense heat sources (such as heaters and direct sunlight). This equipment is not suitable for use in locations
where children are likely to be present.
• INSTALLATION: Slots and openings in the device are provided for ventilation and to avoid overheating.
Make sure the device is never placed near a textile surface that could block the openings. Also keep away
from excessive dust, vibrations and shocks.
• POWER: Only use the power supply indicated on the device of the power source. Devices equipped with a
grounding plug should only be used with a grounding type outlet. In no way should this grounding be
modified, avoided or suppressed. Connection of equipment to main supply must be after branch circuit
breaker of the building installation.
• POWER CORD: The device is equipped with a detachable power cord, to remove mains, disconnect it at
appliance coupler.
Caution: The power cord constitutes the only mean to completely disconnect the equipment from the main power.
Use the following guidelines:
- The equipment connected to the network must have a release system easily accessible and located
outside the unit.
- Unplug the power cord; do not pull on the power cords but always on the plug itself.
- The outlet should always be near the device and easily accessible.
- A power supply cord should be routed so that it is not likely to be walked on or pinched by items placed
upon or against it.
If the power supply cords is damaged, unplug the device. Using the device with a damaged power supply
cord may expose your device to electric shocks or other hazards. Verify the condition of the power supply
cords periodically. Contact your dealer or service center for replacement if damaged.
• CONNECTIONS: All inputs and outputs (except for the power input) are Electrical energy source class 1 (ES1)
as defined in IEC/UL 62368-1 edition 2.
ES1 limits: 60Vdc or 30V rms/ 42.4V peak.
• SERVICING: Do not attempt to service this product yourself by opening or removing covers and screws since
it may expose your device to electric shocks or other hazards. The internal Lithium cell battery is not
replaceable. In case of problem, contact your supplier or Analog Way.
• OPENINGS: Never push objects of any kind into this product through the openings. If liquids have been
spilled or objects have fallen into the device, unplug it immediately and have it checked by a qualified
technician.