4.3.2.2 Power off from the Web RCS
Click in the Web RCS top bar, then click Standby and confirm.
Forced shutdown
Caution: Use forced shutdown only if the unit has crashed. Using forced shutdown regularly is not recommended.
If the Midra™ 4K unit crashed, turn off the power by Forced shutdown.
- Press and hold the Power button on the front panel until shutdown.
4.4 Precautions when mounting a Midra™ 4K unit
Warning: - Follow these precautions to avoid risks for products and users.
- Do not put a magnetic plate in contact with the upper part of the unit as it may block the fans of the unit.
When mounting the Midra™ 4K unit, ensure proper air flow and consider the following points on safe use.
- Always use the handles built on the sides of the chassis for easy mounting into any standard rack or
flight case.
- Place the unit preferably in a cool and dry environment.
- The fans inside the unit expel the heat through the front and rear panels. Therefore, it is crucial that
both the front and the rear are always unobstructed. A minimum of 50 cm (20 in.) of clear space at
the front and rear of the unit is recommended.
- Do not block the ventilation.
- Do not place any fluid above or near the unit.
- Do not place any magnetic equipment on or near the unit.
- Do not apply any pressure against the chassis or the connectors.
To Next Page
Loading...
Need help?
General
