Output pattern
In Outputs, select an output. In Pattern, the following settings are displayed:
Setting name Description / Setting selection
On/Off toggle. Display the pattern in place of the output signal.
Select the pattern to display
Set the pattern to fit the format used, the AOI or the Screen
Raw Colors
On/Off toggle. Using raw colors disables all Adjustments settings (ex: Colorimetry,
User Gain, etc.)
Move On/Off toggle. Usable on moving patterns.
Setting name Description / Setting selection
Raster Box
Format Click to enable raster box on whole format
AOI Click to enable raster box on AOI
Note: For more information on pattern types, see 7.4.3 Patterns page 38.
Output adjustment (image correction)
In Outputs, select an output. In Adjustments, the following settings are displayed:
Setting name Description / Setting selection
Adjust Brightness, Contrast, Saturation and Hue
Adjust Red, Green and Blue
Gamma Adjust Gamma level