Anritsu MT8820C - Page 116

116
[(16QAM, FullRB ) measurements]
17. Execute TESTPRM TX_MAXPWR_16_F to set Test Parameter to TX1 – Max. Power(16QAM/FullRB).
18. Execute steps 9 to 13.
NOTE 1: The Band 1 tolerance value defined in TS36.521–1 is set as the initial value for Pass/Fail judgment.
The following Pass/Fail judgment values are set according to the Configuration ID.
 TP_MPR1_LL
 TP_MPR1_UL
 TP_MPR2_LL
 TP_MPR2_UL
 TP_MPR3_LL
 TP_MPR3_UL