Anritsu MT8820C - Changing DL;UL RB Allocation and MCS Index of each Ccs

75
Changing DL/UL RB Allocation and MCS Index of Each CCs 2.4.7.
The change procedure for DL/UL RB allocation and MCS Index for PCC and SCC is the same as 2CA/3CA (refer to
Chapter 2.2.8 and 2.3.8). This chapter focuses on SCC–3 and describes how to change the SCC–3 DL RB allocation
and MCS Index.
2.4.7.1. MT8821C
1. Changing SCC–3 DL RB Allocation and MCS Indexes
For SCC–3, the following steps are added to the procedure in Chapter 2.3.8
This chapter describes an example where the Channel Bandwidth is 10 MHz.
1. Execute DLIMCS1_SCC3 11 to set Common Parameter – SCC-3 – DL RMC - MCS Index 1 to 11.
2. Execute DLIMCS2_SCC3 12 to set Common Parameter – SCC-3 – DL RMC - MCS Index 2 to 12.
3. Execute DLIMCS3_SCC3 13 to set Common Parameter – SCC-3 – DL RMC - MCS Index 3 to 13.
<When TDD CA>
4. Execute DLIMCS4_SCC3 8 to set Common Parameter – SCC-3 – DL RMC - MCS Index 4 to 8.