EasyManua.ls Logo

Anritsu MT8820C - Client PC Connection and Setting

Anritsu MT8820C
268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
183
Figure 5.1.2.2.2-2 Internet Protocol Version 6 (TCP/IPv6) Properties Screen (Windows 7)
3. Select [Use following IPv6 address] and set [IPv6 address] and [Subnet prefix length] as described below.
The IPv6 address set by this procedure matches the IP address set at [IPV6 Server IP Address ] of the
MT8821C.
To check [IPV6 Server IP Address ] of the MT8821C, refer to chapter 5.1.2.2.1
IPv6 address: 2001::2
Subnet prefix length: 64
NOTE:
Places in the address with contiguous 0s are abbreviated as::. For example, IPv6 Server IP Address
2001:0000:0000:0000:0000:0000:0000:0002 is abbreviated to 2001::2.
4. Click [OK] and close the properties screen for Internet Protocol Version 6 (TCP/IPv6).
Client PC Connection and Setting 5.1.3.
The client PC connection and setting depend on the mobile terminal. Set according to the connection method used.

Table of Contents

Other manuals for Anritsu MT8820C

Related product manuals